Drives confirmed working with KryoFlux

All questions about how to use KryoFlux go here.
Stanglnator
Posts: 2
Joined: Mon Jul 28, 2014 5:27 pm

Re: Drives confirmed working with KryoFlux

Post by Stanglnator »

5,25" Y-E Data, YD-380B - 84 Tracks and work with Flippy Mode without modifications ;)

I was able to read both sides from a C64-Disk.

User avatar
IFW
Posts: 3079
Joined: Mon Nov 08, 2010 2:42 pm

Re: Drives confirmed working with KryoFlux

Post by IFW »

That sounds strange... did you get any *T warnings?

Stanglnator
Posts: 2
Joined: Mon Jul 28, 2014 5:27 pm

Re: Drives confirmed working with KryoFlux

Post by Stanglnator »

Nope only a Message when the Drive reads Track 0 , but i think this is normal.

I read a C64-Disk with Games on both Sides and the finaly created .D64 in Vice where ok.

User avatar
IFW
Posts: 3079
Joined: Mon Nov 08, 2010 2:42 pm

Re: Drives confirmed working with KryoFlux

Post by IFW »

This would be the first ever drive that does not need modding :)
As long as you don't get any *T messages from the format output (except for some protections) it should be fine.

User avatar
Gringo
Posts: 5
Joined: Sun Sep 14, 2014 8:15 pm
Location: Italy / Venice
Contact:

Re: Drives confirmed working with KryoFlux

Post by Gringo »

Read and Write Work Fine, tested only on Amiga Format (Low and High Density)
3.5' - Panasonic JU-257-524P - (0-83) 84 Tracks
3.5' - Panasonic JU-257A606P - (0-83) 84 Tracks
3.5' - Sony MPF920-E FEB2003 - (0-83) 84 Tracks
3.5' - Sony MPF920-E FEB2006 - (0-83) 84 Tracks
----
PS: After some Test, i have noticed the Panasonic JU-257A606P work better on Old Amiga Forced HD (The DD media used making an "hole" on left side),
the Sony don't like wery well this media when they have 20 year or more... :lol:
-= Gringo =-
Kryoflux Rosalie Rev.E

opa
Posts: 1
Joined: Tue Dec 30, 2014 3:34 pm

Re: Drives confirmed working with KryoFlux

Post by opa »

Hi,

again regarding 5,25" Chinon FZ506, Rev.A (with 13 jumpers):

works for me with the following settings:
Jumperposition 13 to 1: (x=jumper set)
x..x......x..

So it means drive is DS1 and termination is off..
This config works both for single drive mode and for 2 drives on the cable.

For the list:
Tracks: 84

JanneG
Posts: 4
Joined: Thu Apr 25, 2013 7:15 am

Re: Drives confirmed working with KryoFlux

Post by JanneG »

"New" unmodified Y-E Data YD-380B here, and seems to be working perfectly with C64 originals. No *T warnings or anything either.

brightcaster
Posts: 237
Joined: Fri Nov 08, 2013 10:48 pm

Re: Drives confirmed working with KryoFlux

Post by brightcaster »

Just to confirm, do I understand right, that this drive reads both sides of C64 flippy-disks without modification!?

User avatar
Hok of Remember
Posts: 260
Joined: Mon Aug 18, 2014 11:55 am
Location: Nordwalde, Germany

Re: Drives confirmed working with KryoFlux

Post by Hok of Remember »

Does this also count for the YD-380 or just the YD-380B? Does anyone have an YD-380 and could check that?
Once upon a time

User avatar
Hok of Remember
Posts: 260
Joined: Mon Aug 18, 2014 11:55 am
Location: Nordwalde, Germany

Re: Drives confirmed working with KryoFlux

Post by Hok of Remember »

Just purchased this. I'll let you know if/how it works for me regarding C64 flippy disks without modification.

JanneG or Stanglnator, does any of you guys know how to set this drive to DD-mode?
Once upon a time

Post Reply