That out of the way, here's where I need help, Ive found three different command line instructions to do what I'm trying to do. Each person who posted them had success and was using Space Quest 1 5.25" to test with. I am also using SQ1 5.25". Ive actually used all three versions of it I have in an attempt to get this to work.
The main issue I suspect, besides what worked for them not working for me for some reason, is the PFI tool from PCE will not perform the Analyse function for me. It reports back "Unknown Operation (AnalyIse)" Ive tried the latest OCT142020 release as well as the oldest available release which dates to 2018. Using Analyse should tell me how many KHz are recorded in my streams and id use that as a perimeter when running PFI/PRI. That said 2 of the 3 working examples used 500000 with the same game and disk successfully.
If you've gotten this to work, id really appreciate some help, or to see what you're entering in that works because for me, either the PSI file generated is virtually empty or its the correct size and will not launch the game (it freezes upon running Sierra.com and the monitor spits out errors). Lastly, all these working examples I'm posting below, were from around 2014 ish leaving me to wonder if Analyse isn't working properly anymore.
Code: Select all
pfi sq1-00.0.raw disk1.pfi
pfi disk1.pfi -l
pfi disk1.pfi -p analyse
pfi disk1.pfi -R 1 -r 500000 -p decode pri disk1.pri
pri disk1.pri -p decode mfm disk1.psi
Code: Select all
pfi track00.0.raw disk1.pfi
pfi disk1.pfi -R 1 -r 500000 -p decode pri disk1.pri
pri disk1.pri -p decode mfm disk1.psi -f -v
psi disk1.psi disk1.img
Code: Select all
pfi track00.0.raw -p double-step -r 600000 -p decode pri disk1-mfm.pri
pri disk1-mfm.pri -c 40-99 -p delete disk1-mfm.pri
pfi track00.0.raw -p double-step -r 300000 -p decode pri disk1-fm.pri
pri disk1-mfm.pri -m disk1-fm.pri disk1.pri
pri disk1.pri disk1.tc