Little drive alignment helper

3rd Party Software, Tools & Add-ons for KryoFlux
Post Reply
Posts: 263
Joined: Tue Dec 06, 2011 9:09 pm

Little drive alignment helper

Post by ZrX » Mon Feb 20, 2017 8:02 pm

Just in case someone prefers tinkering.

While aligning modded diskdrives I'm finding DTC to be very cumbersome with the drive control. Seek to track, stop, seek to track, stop, seek to track, stop, every single time...

So I wrote a little Arduino (Duemilanove) sketch and a host program to have direct control of the drive over USB (on Windows) to make the process much quicker: Control the drive with few keyclicks while aligning, then when done, connect it to KryoFlux and do a few testdumps to check that everything works as it should.

Wiring info is in the sketch. Adapting the host program to another environment shouldn't be much of a problem if you're familiar with your choice of OS.

Just in case someone prefers tinkering. :geek:
(2.67 KiB) Downloaded 40 times

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest