Ready To Go Mobile - Commvex 2013 Las Vegas

Show us your setup and show us where the units are being used.
sncboom2k
Posts: 147
Joined: Sat Jul 21, 2012 5:33 am

Re: Ready To Go Mobile - Commvex 2013 Las Vegas

Post by sncboom2k » Thu Aug 01, 2013 5:30 pm

I sold 5 external cases at CommVex - and hopefully some folks will show off their units here. I told them about the forums. Several were going to order a KF to go with their Panasonic flippy modded drives.

I built a 2 unit model for 5.25's - I'll post it here when I take some pictures of it.

User avatar
mr.vince
Posts: 1872
Joined: Tue Oct 05, 2010 5:48 pm

Re: Ready To Go Mobile - Commvex 2013 Las Vegas

Post by mr.vince » Thu Aug 01, 2013 6:40 pm

Great stuff!

cat64
Posts: 1
Joined: Sat May 03, 2014 9:43 pm

Re: Ready To Go Mobile - Commvex 2013 Las Vegas

Post by cat64 » Sat May 31, 2014 6:01 pm

sncboom2k,that looks really great.

How did you manage to swap the front plate out safely? I'm finding it somewhat difficult to remove the plastic bit of the drive door, I feel like if I pull too hard I'll break the plastic.

Thanks,
- Cat

rcade
Posts: 65
Joined: Mon Nov 21, 2011 5:21 pm

Re: Ready To Go Mobile - Commvex 2013 Las Vegas

Post by rcade » Sat Jun 14, 2014 4:51 pm

Very nice, John.

Here is the rig I used at VCF SouthEast... I used a similar old CD-ROM case I had laying around since the 90's and fitted the 5.25" drive in it like yours. I didn't mount the KF in there, though, because I had to swap it to the 3.5" drive sometimes. The 3.5 drive is in an old Seagate DDS4 tape drive enclosure.

I need a combo case for both of them. :)
Attachments
vcfsekf.jpg
-
Pete Rittwage
C64 Preservation Project
http://c64preservation.com

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest