I bought an old 3.5" external SCSI case for Kryoflux. It has an internal power supply and the board fits nicely. Here are some pictures:
From the side:
You can see the power supply at the bottom.
Closed it looks like this:
Using the power switch I can safely connect Kryoflux with the USB cable first, then turn the drive power on
I could also use the hole under the kryoflux board to move floppy and floppy power cables outside, to power another drive.
Show us your setup and show us where the units are being used.
2 posts • Page 1 of 1