Page 1 of 1

Read one side in preservation mode

Posted: Tue Dec 03, 2013 11:18 pm
by damieng
Hi there.

I'm imaging a bunch of 3" and 5.25" disks in single-sided drives but Kryoflux is reading both sides, even if I copy the profile and set Side Mode to Side 0.

Obviously the second side is a complete second copy of the first and completely redundant and needs to be switched off for these disks.

Update: I've managed to achieve the correct result using the command-line tool. I suspect the UI either isn't putting the side select into the command line or is putting them after the -i0 flag.
As a feature request outputing the command line to the UI window would be useful for learning the various switches/making subtle tweaks the UI can't do.

Thanks,

[)amien

Re: Read one side in preservation mode

Posted: Tue Dec 03, 2013 11:47 pm
by Darkstar
damieng wrote:As a feature request outputing the command line to the UI window would be useful for learning the various switches/making subtle tweaks the UI can't do.
+1 to that! Good idea...

-Darkstar

Re: Read one side in preservation mode

Posted: Wed Dec 04, 2013 2:35 pm
by brightcaster
This feature is allready inplemented! At least in Linux and Mac-OS...

If you start the GUI in terminal-mode the terminal shows all the commands and messages going to and comming from dtc! I'm not famliar with windows, but it should work similar, if you stard the GUI from a DOS-prompt. (Correct me If I'm wrong please)

Re: Read one side in preservation mode

Posted: Wed Dec 04, 2013 7:34 pm
by Feltzkrone
This should also work similarly in windows when typing the following from a DOS-prompt:
java.exe -jar kryofluxui.jar

Double clicking the jar file is usually just the same as launching with via javaw.exe, which does not open a console window.