Using KryoFlux with Linux

All questions about how to use KryoFlux go here.
Tor
Posts: 28
Joined: Mon May 16, 2011 3:08 pm

Re: Using KryoFlux with Linux

Post by Tor » Mon Aug 20, 2012 10:21 am

The group is tty, BUT: It's not the correct device. 'ptmx' is just the pseudo-terminal you're logged in to. Is there no /dev/ttyUSB* of any kind?

-Tor
Hostinfo: Debian SID x86_64 and i686

User avatar
Malvineous
Posts: 156
Joined: Sun Oct 31, 2010 10:57 pm
Location: Brisbane, Australia
Contact:

Re: Using KryoFlux with Linux

Post by Malvineous » Mon Aug 20, 2012 1:47 pm

You won't see /dev/ttyUSB0 if you have blacklisted the cdc module (which you said you did earlier.) DTC does not use this file to access the Kryoflux.

If you follow the instructions in the Linux README file (particularly the bit about the udev rule in section 3) then it will make the Kryoflux accessible to all users in the "floppy" group, which you can then add yourself to. Or you can change the word "floppy" to "users" when you do it on your system, since everyone is normally in the "users" group to begin with.

Post Reply