Drives confirmed working with KryoFlux

All questions about how to use KryoFlux go here.
skideric
Posts: 6
Joined: Wed Apr 06, 2011 7:21 pm

Re: Drives confirmed working with KryoFlux

Post by skideric » Fri Jun 01, 2018 3:53 pm

My Chinnon FR-506 (Not FZ-506) working fine so far on C64 & Apple II Disks.Max Trr reported is 83,which means reads 84 tracks.
Just thought would add it to the list.

ShowStopper
Posts: 1
Joined: Mon Nov 12, 2018 1:19 pm

Re: Drives confirmed working with KryoFlux

Post by ShowStopper » Wed Nov 14, 2018 9:47 pm

TEAC FD-505 5.25"/3,5" Kombidrive is working. 81 Tracks.
I can only test 3.5 Amiga disks, 5.25 disks I have not there.

IMG_20181112_125614.jpg
IMG_20181112_131013.jpg
IMG_20181112_131042.jpg

mfs
Posts: 7
Joined: Sat Nov 03, 2018 5:04 pm

Re: Drives confirmed working with KryoFlux

Post by mfs » Thu Nov 15, 2018 7:28 pm

also my Teac FD-505 is working (looks as if there were different models of this drive, I attach some pics)
maxtrack=81 on both 3,5" and 5,25"

flippy mod seems not possible, as there is not enough room.
manual flipped disks are not readable, as the drive will not spin up with the disk inserted reversed

tested with the following disks:
3,5" 1,44MB HD MS-DOS
3,5" 720kB DD MS-DOS
3,5" 880kB DD Amiga
3,5" 280kB single sided HP86B
5,25" 1,2 MB HD MS-DOS
5,25" 360kB MS-DOS
5,25" 165kB single sided Commodore 64 / Floppy 1541

------

Alps DF354G(121F) 3,5" drive:
maxtrack=83
tested with the same 3,5" disks as above
Attachments
bottom.jpg
top.jpg
front.jpg

User avatar
horse_dreams
Posts: 3
Joined: Wed Jan 16, 2019 8:10 am

Re: Drives confirmed working with KryoFlux

Post by horse_dreams » Tue Jan 29, 2019 9:32 am

Strange the list states that the Sony MPF-920 has only 82 tracks, must be a different revision than mine, which stops at 83 (really 84).

ZrX
Posts: 503
Joined: Tue Dec 06, 2011 9:09 pm

Re: Drives confirmed working with KryoFlux

Post by ZrX » Tue Jan 29, 2019 10:28 am

Yes, there are different models of MPF-920. Can't remember if it had Z after the model on those drives that can step up to 83.

User avatar
horse_dreams
Posts: 3
Joined: Wed Jan 16, 2019 8:10 am

Re: Drives confirmed working with KryoFlux

Post by horse_dreams » Tue Jan 29, 2019 5:31 pm

ZrX wrote:
Tue Jan 29, 2019 10:28 am
Yes, there are different models of MPF-920. Can't remember if it had Z after the model on those drives that can step up to 83.
Mine is just an MPF-920, manufactured in July of 2009, just in case you were wondering.

hydr0x
Posts: 104
Joined: Wed Dec 29, 2010 4:01 pm

Re: Drives confirmed working with KryoFlux

Post by hydr0x » Fri Feb 01, 2019 8:08 am

My MPF920-L only steps up to track 81, so yeah, it must have changed with some revision.

Post Reply