Timeout while waiting for device initialization

All questions about how to use KryoFlux go here.
Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Mon Oct 15, 2018 8:35 am

Hi,

When I try to use dtc it says "Timeout while waiting for device initialization" when I try it again it says "device not found". Any ideas? or is my board simply dead? I already tried to reset it compleatly with the Jumper.



Kind regards

brightcaster
Posts: 143
Joined: Fri Nov 08, 2013 10:48 pm

Re: Timeout while waiting for device initialization

Post by brightcaster » Mon Oct 15, 2018 3:57 pm

It would be much easier to offer any help if you tell something in Detail about your system (OS, Version, etc.)...

If it's windows it could be bossa-driver related again...

David

Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Re: Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Fri Oct 19, 2018 8:34 pm

It`s on Windows and Ubuntu. In Windows it is correctly installed as Kryoflux not Bossa.

brightcaster
Posts: 143
Joined: Fri Nov 08, 2013 10:48 pm

Re: Timeout while waiting for device initialization

Post by brightcaster » Sat Oct 20, 2018 10:08 am

Okay, without giving "details" you may find the solution yourself in this thread:

https://forum.kryoflux.com/viewtopic.ph ... ialization

David

PS: Oh yes, and please pay attention to the "details" ;-)

Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Re: Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Sat Oct 20, 2018 10:06 pm

Well okay maybe I should be more detailed. I'm using the current compiled versions of the dtc in both systems Windows and Ubuntu, I have no other USB device connected than the Kryoflux. When I try to use any command after connecting the device the green led turns on and then it says "Timeout while waiting for device initialization" when I try it again it say that the device is not connected.

SteveConley
Posts: 7
Joined: Tue Oct 23, 2018 2:52 pm

Re: Timeout while waiting for device initialization

Post by SteveConley » Fri Oct 26, 2018 1:35 pm

You have probably already done (or are doing this) but try WITHOUT a floppy drive attached.

Any problems with the drive or cable or "power ground loops" may cause that issue.

Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Re: Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Sun Oct 28, 2018 9:44 am

Yes I already tried different cables and floppy-drives and it still won't work.

Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Re: Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Sun Oct 28, 2018 9:47 am

Without any drive connected i get the same results.

User avatar
mr.vince
Posts: 2099
Joined: Tue Oct 05, 2010 5:48 pm

Re: Timeout while waiting for device initialization

Post by mr.vince » Sun Oct 28, 2018 3:49 pm

When the device is attached and DTC has run (error message etc.), do you:

a) see the device in device manager (if yes, which name)
b) any lights on the board visible? If yes, which?

Jazz Jackrabbit
Posts: 20
Joined: Wed Nov 18, 2015 9:50 am

Re: Timeout while waiting for device initialization

Post by Jazz Jackrabbit » Thu Nov 08, 2018 10:07 pm

mr.vince wrote:
Sun Oct 28, 2018 3:49 pm
When the device is attached and DTC has run (error message etc.), do you:

a) see the device in device manager (if yes, which name)
b) any lights on the board visible? If yes, which?
Device manager says "Kryoflux disk system" so no BOSSA

Only the green and red one is visible.

Post Reply