Page 7 of 7

Re: Need advice on how to recover 5.25" floppy

Posted: Fri Dec 27, 2019 2:38 pm
by ZrX
What's the exact size of the .img file you need to write?

Re: Need advice on how to recover 5.25" floppy

Posted: Sat Dec 28, 2019 1:47 pm
by harlus
360 KB (368,640 byte)

I used a .img acquired with kryoflux, than i deleted all the files and injected some new files into the image.
Than i converted from .img to .raw using hxc emulator

Re: Need advice on how to recover 5.25" floppy

Posted: Sat Dec 28, 2019 2:44 pm
by SomeGuy
"C:\path\01.0.raw" -e81 -d0 -dd1 -w"

It could be that you confused things by not exporting with a full filename. Typically when I export from HxC to KF raw, I export with the file name "track" so I get track00.0.raw, track00.1.raw, track01.0.raw, etc, the same as the KF GUI.

Re: Need advice on how to recover 5.25" floppy

Posted: Sat Dec 28, 2019 5:18 pm
by harlus
Ok, it seems i found the cause of the problem.
It seems that one of the two drives i use is defective and can't write disk. I connected kryoflux to the other drive and it writes disks correctly.
Thank for your help