Page 6 of 7

Re: Need advice on how to recover 5.25" floppy

Posted: Thu Nov 07, 2019 8:32 pm
by ZrX
The resulting file from -i6 is d64 regardless of the suffix.

Re: Need advice on how to recover 5.25" floppy

Posted: Thu Nov 07, 2019 9:57 pm
by harlus
it's there some way to save it in .img format?

Re: Need advice on how to recover 5.25" floppy

Posted: Sat Nov 09, 2019 10:16 am
by brightcaster
Image format is almost the same as d64! Both is basically a sector-for-sector copy of a disk...

683 sectors of 256 byte resulting in 174848 byte which is the length of a d64 file.
2880 sectors of 512 byte resulting in 1474 560 byte which is the lengt of a standard img file (1,44 MBdisk)

There are no aditional information stored in theese files (nothing that isn't on the disk itself...).

So, if you wan't it in image format you can rename .d64 to .img ;-)

David

Re: Need advice on how to recover 5.25" floppy

Posted: Fri Nov 22, 2019 11:13 am
by harlus
brightcaster wrote: Sat Nov 09, 2019 10:16 am Image format is almost the same as d64! Both is basically a sector-for-sector copy of a disk...

683 sectors of 256 byte resulting in 174848 byte which is the length of a d64 file.
2880 sectors of 512 byte resulting in 1474 560 byte which is the lengt of a standard img file (1,44 MBdisk)

There are no aditional information stored in theese files (othing that isn't on the disk itself...).

So, if you wan't it in image format you can rename .d64 to .img ;-)

David
Ok perfect, thanks for the explanation ;)



I have another question, i'm just curious about this disk (it's probably a MFM disk, not related to c64 disks):
https://filebin.net/wuw31kto54w81vev
It seems unformatted but looking at the graphs it seems there is something, it's not noisy like unformatted tracks. Have you any idea of what it is? Physically the surface of the disk seems brand new (no scratches).
It's not an important disk, i'm just curious.

Re: Need advice on how to recover 5.25" floppy

Posted: Fri Nov 22, 2019 8:53 pm
by brightcaster
Just a quick shot: Could be a 80 track disk reading with a 40 track drive! As there are shades of a 15 sectors per track format maybe a 1,2Mbyte DOS Disk?

David

Re: Need advice on how to recover 5.25" floppy

Posted: Fri Nov 22, 2019 11:42 pm
by harlus
brightcaster wrote: Fri Nov 22, 2019 8:53 pm Just a quick shot: Could be a 80 track disk reading with a 40 track drive! As there are shades of a 15 sectors per track format maybe a 1,2Mbyte DOS Disk?

David
I'm not sure if i understood your question, however this is the label on the disk:

https://i.imgur.com/Qj2yPxI.jpg

Re: Need advice on how to recover 5.25" floppy

Posted: Sat Nov 23, 2019 12:05 am
by SomeGuy
That is a 1.2mb (96tpi/80track high density) floppy disk. You must read it using a 1.2mb 5.25" floppy drive. It will not read in a 360k (48tpi/40track low density) drive.

Re: Need advice on how to recover 5.25" floppy

Posted: Sun Dec 22, 2019 1:57 pm
by harlus
Is there some way to write on a ibm dos floppy?
I tried the "WildeWutz" GUI but it says "supported file types: ADF, G64, IPF & STREAM", is there some way to write a .img file?

Re: Need advice on how to recover 5.25" floppy

Posted: Sun Dec 22, 2019 5:08 pm
by ZrX
There is a way to create raw stream files from standard nonprotected DOS disk .img imagefiles using HxCFloppy software and then writing from those using KryoFlux.

Re: Need advice on how to recover 5.25" floppy

Posted: Thu Dec 26, 2019 10:01 pm
by harlus
ZrX wrote: Sun Dec 22, 2019 5:08 pm There is a way to create raw stream files from standard nonprotected DOS disk .img imagefiles using HxCFloppy software and then writing from those using KryoFlux.
I tried the conversion but it seems it's not working, it only writes a single track, and it seems it always write any track on the 1st track of the disk.
Is there a way to fix it and automatize the process? (also a batch script would be fine)

Here it's the log from WildeWutz:

Writing using default precomp factor...

C:\path\01.0.raw" -e81 -d0 -dd1 -w

Image name: C:\path
Image type: RAW
Image sides: 2
Image tracks: 42
Analysis time: 2.454 s
Side 0: td: 1, cf: off, data: 42, unformatted: 0, nfr: 0
Side 1: td: 1, cf: off, data: 42, unformatted: 0, nfr: 0
Filter mode: side -wg: 3, crosstalk -wk: 0[3]
Side mode: side -g: 2, td -k: 1, flip -wy: 0, flippy -y: 0
Write mode: bias -wb: 0, erase -we: 0
00.0 : Writing RAW