KryoFlux^® Support Forums

I'm not that familiar with MacOS but this should help to find which driver is loaded:

https://stackoverflow.com/questions/381 ... -on-darwin

David

Try writing the attached raw stream to a 3" floppy and look if the clipper can read it...

David

There is another notable anomaly! The first valid track of the raw data you provided starts with ID01 (usually ID00) and the last track is ID40 (usually ID39). But the floppy head will always start physically at track 00 whatever ID it has. So I guess it will not find anything there because that tra...

If you have a valid mfm sector dump of a known geometry you can always read that to the HxC tool and export that again as kryoflux raw stream. That (exported) raw stream will be perfectly alligned again and chances are great that written back to a floppy everything works. https://hxc2001.com/downloa...

Most of the time it is the disc that stucks in the sleeve because it has deformed over the years. If you dare and just want to dump the data on it, you can put the disk into another sleeve. If there is nothing of value on them (e.g. you just want to use them for general purpose), I would throw them ...

The 3" floppy of the PDC Clipper was doublesided 500kB. So, there is no chance to get it converted to d64! The Clipper had it's own OS in proprietary roms on the c64 motherboard and in the IEC/shugart converter... But it should be possible to connect a XU1541 to the IEC and read or write standa...

Yes, the diskdefs with 40 tracks would mean singlesided 48tpi. Doublesided floppies with 48 tpi are 80 tracks and doublesided floppies with 96 tpi are 160 tracks in cpmtools diskdefs (Tracks = Cylinders * Sides)! For me it looks as if a 80 tracks drive was connected to the tatung einstein. But the e...

No matter if it's DOS or CPM it should switch from side0 to side1 and give you no yellow "S"! It looks as if you read side 0 twice instead of both sides! You can check that if you dump the sides separately ("File/Settings/MFM Sector Image/Side Mode" from GUI menu). Both images sh...

Can you check if the problem also exists if you dump 720k 3,5" floppies? Looks as if the HD and SIDE1 signals interfere each other...

Could be a broken resistor array R-MAT1 on the kryoflux board (schematics are in the schematics folder of your kryoflux installation).

David

-i8a enforces 16 sectors and re-orders the sectors to be interleaved. The interleaving method is fixed by the OS, thus having strictly 16 sectors for sector interleaving/re-ordering is mandatory. With -i8 you can define any parameter you like, including different number of sectors, but OS interleav...