KryoFlux^® Support Forums

Great stuff and thanks for sharing...

Alignment disks are "analogue" in nature and require, as outlined, special signal generators. A regular drive won't be able to create or duplicate these.

I would strongly suggest reading the manual as the above heavily implies this hasn't been done. I wish KF could be easy as a toy, but as with all precision tools, there is a learning curve. Yes, there is a GUI. It's also in the manual. Please read it. It has safety instructions. You don't want to lo...

John, I assume you're actually trying to "install" the .inf file. This is purely a driver, so please try by finding the "correct" device, e.g. Bossa device, and then chose to change driver, have disk and so forth.

A little more explanation including a screenshot or two might help.

If the board is good, attaching it in e.g. Windows will cause a "bing" and a SAMBA device or similar will show up. The Mac will also show something as a connected device in "About this Mac / System Report / USB". To search for the issue the GUI is not helpful. It's just a GUI, us...

Since the additional signal needed to turn on the bypass makes use of one of the odd (1, 3, 5, 7 etc.) cables which are usually grounded, adding another, unmodified, drive to a flippy setup will cause this operation to fail. This is also documented. Is this possible? If not, I have wasted over €500....

Thanks a lot mr.vince, the drive is a Fujitsu M2553K, I found a manual (I am attaching it here), and it seems that this model just goes 360rpm (see page 14). So do you think that if I can dump the disk with a 300rmp speed I would be able to create readable images? Just for clarification purposes: K...

I have no experience with PC Jr. and PSI files, but does the format itself support non-standard data, violations of the recording scheme? If yes, then probably the software used for conversion does not present the scheme violations in a way expected by the program.

There is a "density line" setting under the drive menu which should, while switching between HD and DD, also change the rpm. But this does not always work, it's something the drive does or does not. Some drives can be set via jumpers. KryoFlux itself can resample the data internally and in...

Could also be a lose connection or a bad cable. Have had this before.