Search found 1624 matches

by mr.vince
Mon Nov 19, 2018 3:34 pm
Forum: Support
Topic: Error writing Kryoflux stream
Replies: 19
Views: 790

Re: Error writing Kryoflux stream

Please use proper formatting for logs (code tags) to avoid cluttering the whole screen. Thanks.
by mr.vince
Mon Nov 19, 2018 3:31 pm
Forum: Support
Topic: Timeout while waiting for device initialization
Replies: 20
Views: 409

Re: Timeout while waiting for device initialization

Can this be tested on a different PC to make sure it's not computer/OS related?
by mr.vince
Sun Nov 11, 2018 11:17 am
Forum: Support
Topic: 8" CDC/MPI drive says max track is 41 ??
Replies: 8
Views: 249

Re: 8" CDC/MPI drive says max track is 41 ??

You can always manually set max track in the GUI regardless of auto detection.
by mr.vince
Sun Nov 11, 2018 10:54 am
Forum: Support
Topic: Timeout while waiting for device initialization
Replies: 20
Views: 409

Re: Timeout while waiting for device initialization

Please be more specific. Red is a power LED but green is a status LED. This means if the green LED is on there's software running on the board which can only be sent to the board if there is a connection. What further puzzles me.... There's no firmware from us that turns on the green LED unless it's...
by mr.vince
Thu Nov 08, 2018 6:10 pm
Forum: Support
Topic: Re: Timeout while waiting for device initialization
Replies: 3
Views: 226

Re: Re: Timeout while waiting for device initialization

Please reply in the correct thread so I can reply to the original question. Answering here makes it just difficult to understand.
by mr.vince
Tue Nov 06, 2018 9:12 pm
Forum: Support
Topic: Unsure about the role of the firmware loading process
Replies: 1
Views: 110

Re: Unsure about the role of the firmware loading process

The manual sums this up pretty comprehensively.
"If some other application accidentally writes something into the flash, unplug the device. Set the erase jumper to on. Connect the device, wait at least ten seconds."

Unless something else has flashed your KryoFlux, you don't need this jumper.
by mr.vince
Tue Nov 06, 2018 8:38 pm
Forum: Support
Topic: Newbie: Where to start to read with which I have to start with?
Replies: 15
Views: 398

Re: Newbie: Where to start to read with which I have to start with?

You know there's a way to solve this professionally, right?

Or prove me wrong and build the above and show us that it works! ;)
by mr.vince
Tue Nov 06, 2018 8:35 pm
Forum: Support
Topic: Chinon FR-506 - flippy?
Replies: 11
Views: 250

Re: Chinon FR-506 - flippy?

Not if you want to use them as standard drives, too.

Some can be permanently misalinged by aligning the upper head -8 tracks into the negative domain.
by mr.vince
Tue Nov 06, 2018 8:34 pm
Forum: Support
Topic: Does the Kryoflux firmware support "track shifting"...
Replies: 3
Views: 118

Re: Does the Kryoflux firmware support "track shifting"...

However, the Kryoflux folks will complain that this method is "insufficient" for flux preservation purposes as the index is technically in the "wrong" place. However, that only matters if you are dumping factory original software titles. We'll, I am tempted to say you're already belly up when you t...
by mr.vince
Tue Nov 06, 2018 8:29 pm
Forum: Support
Topic: Chinon FR-506 - flippy?
Replies: 11
Views: 250

Re: Chinon FR-506 - flippy?

Hence our video. Happy dremeling!