KryoFlux^® Support Forums

SomeGuy wrote: ↑Sun Jul 29, 2018 3:02 am Typically the way I do it is to open an IMG/IMA or IMD file with the HxC disk tool software and and then save it as a kryoflux stream.

so once i convert the image to raw files how do i copy it to a disk? Gui and command line? And 5.25” and 3.5” settings?

If you have 2 drives hooked up you need to have the jumper pins on the kryoflux set to 2 drives. Im guessing you are using the gui and not command line? So what is your second drive you have? Is it a teac fd55gfr as well or something different? Since you are using an 80 track drive you probably need...

Hiya, Here is a link to a photo with a closer look at the ribbon at both ends. I thought I went by the guide for the sides the red line that data line 1 is supposed to be on. Is it wrong? https://imgur.com/EyJXaB4 All I can tell you is that for *my* Teac drive, that would be connected backwards at ...

Edited

Here a pic of mine. Ignore the piece of junk “device side” board thats under the cable. It is not used.
https://m.imgur.com/9mZIV1z

Hiya, Here is a link to a photo with a closer look at the ribbon at both ends. I thought I went by the guide for the sides the red line that data line 1 is supposed to be on. Is it wrong? https://imgur.com/EyJXaB4 Is the cable not keyed at floppy drive? It is backwards plugged into the drive. I hav...

Ok good to know. Thanks.

so i am using the gui and i am getting unkown format on a 40 track drive with an ibm disk. does this mean anything good or bad? Motor(true) Side(0) TrackPosition(38) Stream(true) Stream(false) TrackDataEvent(38.0,TrackInfoFull(38.0,Metrics(40768,0.104,190441,300.244,Base(2.02,99.153),Bands(ArraySeq(...

Deleted. Fixed problem

i know what commands i type for 360kb, 1.2mb and 1.44 floppies. however using the gui i am not sure the correct output options to choose. fm sector and mfm sector look like they are the closest to being correct, but i have no clue what is the correct options?