Search found 4 matches

by Voy
Fri Jul 10, 2015 6:58 pm
Forum: Support
Topic: Drives confirmed working with KryoFlux
Replies: 231
Views: 130358

Re: Drives confirmed working with KryoFlux

Thanks for the info. I think that a8rawconv assumes that stream files were dumped with 96tpi drive, not 48tpi (ie. my Mitsumi D503V): ---> http://atariage.com/forums/topic/231835-a8rawconv-a-new-raw-disk-conversion-utility/page-3#entry3189926 I found that DTC generates .XFD files (-i3a and -i4a) wit...
by Voy
Fri Jul 10, 2015 4:58 pm
Forum: Support
Topic: Drives confirmed working with KryoFlux
Replies: 231
Views: 130358

Re: Drives confirmed working with KryoFlux

It works :) but it produces correct .XFD image file with -i3a image type ONLY (not with -i0 or -i0a ). I use a8rawconv by Avery Lee to convert .raw files to .ATX image but it can convert track 0 only despite correctly displayed tracks during reading by DTC. a8rawconv shows that it can not find any s...
by Voy
Thu Jul 09, 2015 6:40 am
Forum: Support
Topic: Drives confirmed working with KryoFlux
Replies: 231
Views: 130358

Re: Drives confirmed working with KryoFlux

Yes, of course. Mitsumi D503V has CM: maxtrack=41 (using DTC -c2 command) but DTC shows in the logs below that maxtrack is 83 . :? -k1 G:\KryoFlux\kryoflux_2.51_windows\dtc\DTC.exe -l15 -fG:\KryoFlux\kryoflux_2.51_windows\dtc\test.xfd -s0 -e39 -i3a -d0 -t10 -r10 -dd0 -k1 00028655: status=0 00028669:...
by Voy
Wed Jul 08, 2015 6:11 pm
Forum: Support
Topic: Drives confirmed working with KryoFlux
Replies: 231
Views: 130358

Re: Drives confirmed working with KryoFlux

My 5.25" drives that work with KryoFlux: - TEAC FD-55BR (360 kB) - this drive works but it has track 0 shifted: track 0 = track 2 on the disk (and so on...) - Mitsumi D503V (360 kB drive, built into Atari XF551 disk drive) - works great but if want to dump any Atari 8-bit disk you will get even trac...